Internal Flat Dripper Irrigation Pipe Line

This assembly line is well equipped, which is able to make dropping tubes with embedded flat droppers, and also make buried dropping tubes with embedded flat droppers. When producing the dropping tube of 0.15mm in wall thickness, production speed shall be controlled at less than 100m/min. If the production speed is over 100m/min, special material for dropping tube shall be used.Specifications: 1.) Speed of the assembly line: a) Max. (at wall thickness of 0. 15mm): 170m/min b) For commercial production: 140m/min c) Min. (at wall thickness of 1. 0mm): 40m/min (#16mm) 2.) Max. embedding rate of droppers: 600pcs 3.) Height of assembly line's center line: 1,000mm 4.) Direction of the assembly line: from right to left 5.) Color of the assembly line: blue, white (except for stainless steel) 6.) Unit packing length of the product: 500m, 1,000m, 2,500m/reel 7.) Pulling speed: 10 - 200m/min 8.) Atmospheric vacuum pressure: -0. 001 - 0. 002KPa 9) Gross power of equipment: 115kW 10.) Installation length of equipment: 32 - 40m 11.) Weight of equipment: about 4,500kg